Galvanised edge trim is available to form the slab edge at the perimeter and around voids. This edge trim acts as permanent formwork only to support the wet weight of concrete during construction.
Edge Trim
Trim01
ChannelTrim
Trim09
Trim12
Description
Benefits
• Permanently forms the edge of the concrete slab
• To be used in place of traditional timber shuttering for speed of installation
• Where edge trim is required to form a curve, straight lengths are provided to be faceted on site to form the desired radius
Gauges
• 1.0mm
• 1.2mm
• 1.6mm
• 2.0mm
Specification
• Standard 3000mm lengths, others available on request
• Available in girth with multiples of 25mm
• Tethering holes at 750mm spacings
• Trim09 with Trim01 can be used to create a removable toe-board solution
• Trim12 to be used where VoidSafe™ is required
Steel Grade
• DX 51D
Finishes
• Galvanised (Z275)
• HD (ZM310)
• Stainless Steel (SS)
Profile Properties
| Product Code | Use | a | b | c | d | e | Galv | Finish HD | SS |
|---|---|---|---|---|---|---|---|---|---|
| 01 | Standard Trim | Min 50mm | Slab Depth | Min 20mm | - | - |  | | - |
| 01 | Removable Toeboard | 50mm | 150mm | 25mm | - | - | | | - |
| 09 | Trim for Toeboard | Min 75mm | Slab Depth | Min 50mm | - | - | | | - |
| Channel Trim | Bolt channel | Min 75mm | Slab Depth | Min 20mm | Channel Size | - | | - | |
| 12 | VoidSafe™ | Min 90mm | b+d = Slab Depth | Min 55mm | 40mm / 50mm* | Min 20mm | | | - |
* Dimension to suit VoidSafe™ specification. This dimension of 40mm/50mm can be altered if required.
