4.11 - End caps

From TGN Online
Jump to: navigation, search

Where trapezoidal (TR50, TR60+ or TR80+) decking sheets end at the perimeter of the building or at internal voids, the ends of the sheets are sealed with 0.7mm gauge galvanised end caps or polystyrene inserts. These end caps will also be required where you have a change in span direction (refer to Fig 4.11a). Due to the small re-entrant rib size of the R51+ profile, sheets are typically sealed using tape or expandable foam.


4.11a.jpg


Refer to SMD Data sheet SMD.DOD.187 - TR End Closure Detail




Back to Contents Page


Need Further Guidance?

Contact us on +44 (0)1202 718 898 or email our Technical Team