Difference between revisions of "11.1 - Cartridge tools"
From TGN Online
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | Fixing of decking and edge trim is typically carried out using low velocity powder (shot-firing) or gas-actuated cartridge tools. These provide a fast and efficient method of securing the decking sheets. The tools used are generally Hilti DX450 or DX76 (shot-firing), GX 3 (gas-actuated) or similar approved. All operators must be fully trained and competent to use these tools and at least 18 years of age. | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | Fixing of decking and edge trim is typically carried out using low velocity powder (shot-firing) or gas-actuated cartridge tools. These provide a fast and efficient method of securing the decking sheets. The tools used are generally Hilti | + | |
| Line 9: | Line 5: | ||
| − | + | Go to '''[[11.2 - Decking around columns|NEXT]]''' section | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Latest revision as of 08:57, 15 August 2018
Fixing of decking and edge trim is typically carried out using low velocity powder (shot-firing) or gas-actuated cartridge tools. These provide a fast and efficient method of securing the decking sheets. The tools used are generally Hilti DX450 or DX76 (shot-firing), GX 3 (gas-actuated) or similar approved. All operators must be fully trained and competent to use these tools and at least 18 years of age.
Go to NEXT section
