Difference between revisions of "4.2 - Sheet lengths"
From TGN Online
(Created page with "[https://smdltd.co.uk/technical-info/Contents '''Back to main Contents page'''] In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended she...") |
|||
| Line 4: | Line 4: | ||
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance. | In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance. | ||
| + | |||
[[File:4.2a-table.jpg|400px]] | [[File:4.2a-table.jpg|400px]] | ||
Revision as of 13:39, 24 January 2017
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance.
Other items within 4.0 - Design - Floor deck:-
[4.1 - Benefits of composite metal deck]
[4.2 - Sheet lengths]
[4.3 - Temporary propping]
[4.4 - Lateral restraint and diaphragm action]
[4.5 - Bearings / Support]
[4.6 - Fixings]
[4.7 - Cantilevers]
[4.8 - Edge trim]
[4.9 - Flashings]
[4.10 - Steps in slab]
[4.11 - End caps]
