Difference between revisions of "4.2 - Sheet lengths"
From TGN Online
Line 14: | Line 14: | ||
'''Other items within 4.0 - Design - Floor deck:-''' | '''Other items within 4.0 - Design - Floor deck:-''' | ||
− | '''[4.1 - Benefits of composite metal deck]''' | + | '''[https://smdltd.co.uk/technical-info/4.1_-_Benefits_of_composite_metal_deck 4.1 - Benefits of composite metal deck]''' |
− | + | ''[https://smdltd.co.uk/technical-info/4.2_-_Sheet_lengths 4.2 - Sheet lengths]'' | |
− | '''[4.3 - Temporary propping]''' | + | '''[https://smdltd.co.uk/technical-info/4.3_-_Temporary_propping 4.3 - Temporary propping]''' |
− | '''[4.4 - Lateral restraint and diaphragm action]''' | + | '''[https://smdltd.co.uk/technical-info/4.4_-_Lateral_restraint_and_diaphragm_action 4.4 - Lateral restraint and diaphragm action]''' |
− | '''[4.5 - Bearings / Support]''' | + | '''[https://smdltd.co.uk/technical-info/4.5_-_Bearings_/_Support 4.5 - Bearings / Support]''' |
− | '''[4.6 - Fixings]''' | + | '''[https://smdltd.co.uk/technical-info/4.6_-_Fixings 4.6 - Fixings]''' |
− | '''[4.7 - Cantilevers]''' | + | '''[https://smdltd.co.uk/technical-info/4.7_-_Cantilevers 4.7 - Cantilevers]''' |
− | '''[4.8 - Edge trim]''' | + | '''[https://smdltd.co.uk/technical-info/4.8_-_Edge_trim 4.8 - Edge trim]''' |
− | '''[4.9 - Flashings]''' | + | '''[https://smdltd.co.uk/technical-info/4.9_-_Flashings 4.9 - Flashings]''' |
− | '''[4.10 - Steps in slab]''' | + | '''[https://smdltd.co.uk/technical-info/4.10_-_Steps_in_slab 4.10 - Steps in slab]''' |
− | '''[4.11 - End caps]''' | + | '''[https://smdltd.co.uk/technical-info/4.11_-_End_caps 4.11 - End caps]''' |
Revision as of 14:34, 24 January 2017
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance.
Other items within 4.0 - Design - Floor deck:-
4.1 - Benefits of composite metal deck