4.2 - Sheet lengths

Back to main Contents page

In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance.

---

Other items within 4.0 - Design - Floor deck:-

[4.1 - Benefits of composite metal deck]

[4.2 - Sheet lengths]

[4.3 - Temporary propping]

[4.4 - Lateral restraint and diaphragm action]

[4.5 - Bearings / Support]

[4.6 - Fixings]

[4.7 - Cantilevers]

[4.8 - Edge trim]

[4.9 - Flashings]

[4.10 - Steps in slab]

[4.11 - End caps]