Difference between revisions of "8.7 - Cantilevers"
From TGN Online
| Line 1: | Line 1: | ||
| − | The maximum cantilever figures indicated in '''[[9.2 - Pack size and sheet length limits| | + | The maximum cantilever figures indicated in '''[[9.2 - Pack size and sheet length limits|Section 9.2]]''' are based on a point load of 0.9kN positioned at the end of the cantilever. Cantilevers must be stiffened with a suitable flashing fixed to the end of the decking at every rib position to prevent spread of the deck profile; refer to Fig. 8.7a. |
Revision as of 10:15, 11 December 2017
The maximum cantilever figures indicated in Section 9.2 are based on a point load of 0.9kN positioned at the end of the cantilever. Cantilevers must be stiffened with a suitable flashing fixed to the end of the decking at every rib position to prevent spread of the deck profile; refer to Fig. 8.7a.
Go to NEXT section
