Difference between revisions of "8.8 - Sheet lengths"
From TGN Online
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length varies depending on the deck profile and gauge (refer to Section 9.2). Where sheet lengths exceeding the recommended maximum length are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance. | In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length varies depending on the deck profile and gauge (refer to Section 9.2). Where sheet lengths exceeding the recommended maximum length are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance. | ||
| Line 9: | Line 5: | ||
| − | + | Go to '''[[8.9 - Fire rating|NEXT]]''' section | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Revision as of 09:46, 21 March 2017
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length varies depending on the deck profile and gauge (refer to Section 9.2). Where sheet lengths exceeding the recommended maximum length are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance.
Go to NEXT section
