Difference between revisions of "4.2 - Sheet lengths"
From TGN Online
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance. | In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance. | ||
| Line 12: | Line 8: | ||
| − | + | Go to '''[[4.3 - Temporary propping|NEXT]]''' section | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Revision as of 09:22, 21 March 2017
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance.
Go to NEXT section
