Difference between revisions of "11.11 Disposal of Waste"
| Line 6: | Line 6: | ||
Suitable certificated lifting skips or skips with lifting cradles provide the safest means of clearing waste from each level. Provision must be made for plant to lift these skips to and from the working level. Roll over skips provide an acceptable alternative. | Suitable certificated lifting skips or skips with lifting cradles provide the safest means of clearing waste from each level. Provision must be made for plant to lift these skips to and from the working level. Roll over skips provide an acceptable alternative. | ||
| + | |||
| + | |||
| + | [[File:11.11a.png|500px|link=]] | ||
| + | |||
| + | |||
| + | '''Waste materials on pallets''' | ||
| + | |||
| + | Loading & securing waste onto a pallet for removal by forklift truck is a good solution provided a loading bay & suitable plant is available. This is often adopted even if the removal is not undertaken when SMD are on site but is actioned later in build when plant & access are available. | ||
| + | |||
| + | |||
| + | [[File:11.11b.png|500px|link=]] | ||
| + | |||
| + | |||
| + | '''Removal of waste by hand is not acceptable''' | ||
| + | |||
| + | Carrying scrap down stairs in individual pieces increases the risks of cuts to hand, arms, legs & face, increases risks from manual handling. Very time consuming & adds duration to SMD works. Carrying scrap down ladders adds the hazard of a fall from height & is unacceptable. | ||
| + | |||
| + | '''SMD will NOT undertake this operation''' | ||
| + | |||
| + | |||
| + | [[File:11.11c.png|500px|link=]] | ||
| + | |||
| + | |||
| + | '''Removal of waste by throwing is not acceptable''' | ||
| + | |||
| + | Uncontrolled “Bombing” either onto the ground or directly into a skip is unacceptable. Risk of injury to other trades & or public. | ||
| + | |||
| + | '''SMD will NOT undertake this operation''' | ||
| + | |||
| + | |||
| + | [[File:11.11d.png|500px|link=]] | ||
| + | |||
Revision as of 13:49, 13 April 2022
Consideration must be given to ensure off-cuts of decking and edge trims, metal banding, timber, cardboard boxes, failed shear studs etc. can be safely removed from the building.
The lifting down of scrap is the responsibility of the client.
Waste materials in skips
Suitable certificated lifting skips or skips with lifting cradles provide the safest means of clearing waste from each level. Provision must be made for plant to lift these skips to and from the working level. Roll over skips provide an acceptable alternative.
Waste materials on pallets
Loading & securing waste onto a pallet for removal by forklift truck is a good solution provided a loading bay & suitable plant is available. This is often adopted even if the removal is not undertaken when SMD are on site but is actioned later in build when plant & access are available.
Removal of waste by hand is not acceptable
Carrying scrap down stairs in individual pieces increases the risks of cuts to hand, arms, legs & face, increases risks from manual handling. Very time consuming & adds duration to SMD works. Carrying scrap down ladders adds the hazard of a fall from height & is unacceptable.
SMD will NOT undertake this operation
Removal of waste by throwing is not acceptable
Uncontrolled “Bombing” either onto the ground or directly into a skip is unacceptable. Risk of injury to other trades & or public.
SMD will NOT undertake this operation
Back to Contents Page
Need Further Guidance?
Contact us on +44 (0)1202 718 898 or email our Technical Team
