Difference between revisions of "2.4 - Roof deck material specification"
From TGN Online
| (9 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | The SR range of products are manufactured from steel strip in compliance with BS EN 10143 and BS EN 10346. All products have a minimum yield strength of 320N/mm² (deeper than SR100) or 350N/mm² (up to SR100) and are available in two standard coating options: | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | The | + | |
'''Galvanised''' | '''Galvanised''' | ||
| − | Hot-dip galvanised with minimum coating mass of 275g/m². | + | Hot-dip galvanised with a minimum coating mass of 275g/m² (Z) coating (0.02mm per side) or 120g/m² (ZM). |
| − | ''' | + | '''White Liner''' |
| − | Hot-dip galvanised with a minimum coating mass of 150g/m² | + | Hot-dip galvanised with a minimum coating mass of 150g/m² and white polyester to the interior surface. |
| − | '''[https://smdltd.co.uk/ | + | '''[https://smdltd.co.uk/products-services/roof-deck/ Refer product specific data sheets for more information]''' |
| Line 22: | Line 18: | ||
| − | '''[ | + | Go to '''[[2.5 - Concrete|NEXT]]''' section |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Latest revision as of 13:00, 20 January 2023
The SR range of products are manufactured from steel strip in compliance with BS EN 10143 and BS EN 10346. All products have a minimum yield strength of 320N/mm² (deeper than SR100) or 350N/mm² (up to SR100) and are available in two standard coating options:
Galvanised
Hot-dip galvanised with a minimum coating mass of 275g/m² (Z) coating (0.02mm per side) or 120g/m² (ZM).
White Liner
Hot-dip galvanised with a minimum coating mass of 150g/m² and white polyester to the interior surface.
Refer product specific data sheets for more information
Go to NEXT section
