Difference between revisions of "4.2 - Sheet lengths"
From TGN Online
(Replaced image with table, for accessibility) |
|||
Line 1: | Line 1: | ||
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance. | In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance. | ||
− | + | {| class="wikitable" style="margin:auto" | |
− | + | |+ Table 4.2a | |
− | + | |- | |
+ | ! Profile !! Gauge (mm) !! Max. Length (m) | ||
+ | |- | ||
+ | | rowspan="4"|R51+|| 0.8 || 10 | ||
+ | |- | ||
+ | | 0.9 || 10 | ||
+ | |- | ||
+ | | 1.0 || 10 | ||
+ | |- | ||
+ | | 1.2 || 9.5 | ||
+ | |- | ||
+ | | rowspan="5"|TR50|| 0.7 || 12 | ||
+ | |- | ||
+ | | 0.8 || 12 | ||
+ | |- | ||
+ | | 0.9 || 11 | ||
+ | |- | ||
+ | | 1.0 || 10 | ||
+ | |- | ||
+ | | 1.2 || 8.5 | ||
+ | |- | ||
+ | | rowspan="3"|TR60+|| 0.9 || 9.5 | ||
+ | |- | ||
+ | | 1.0 || 8.5 | ||
+ | |- | ||
+ | | 1.2 || 7.5 | ||
+ | |- | ||
+ | | rowspan="3"|TR80+|| 0.9 || 10 | ||
+ | |- | ||
+ | | 1.0 || 10 | ||
+ | |- | ||
+ | | 1.2 || 10 | ||
+ | |} | ||
---- | ---- |
Latest revision as of 16:20, 1 November 2023
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance.
Profile | Gauge (mm) | Max. Length (m) |
---|---|---|
R51+ | 0.8 | 10 |
0.9 | 10 | |
1.0 | 10 | |
1.2 | 9.5 | |
TR50 | 0.7 | 12 |
0.8 | 12 | |
0.9 | 11 | |
1.0 | 10 | |
1.2 | 8.5 | |
TR60+ | 0.9 | 9.5 |
1.0 | 8.5 | |
1.2 | 7.5 | |
TR80+ | 0.9 | 10 |
1.0 | 10 | |
1.2 | 10 |
Go to NEXT section