Difference between revisions of "4.9 - Flashings"
From TGN Online
| Line 1: | Line 1: | ||
'''4.9.1 – Shallow floor deck flashing options.''' | '''4.9.1 – Shallow floor deck flashing options.''' | ||
| − | Where perimeter beams, or intermediate beams that are to receive shear studs, run parallel to the deck span and the deck width either falls short or is positioned such that a trough is not located over the beam flange, galvanised mild steel flashings should be provided to form a closure to the profile (refer to | + | Where perimeter beams, or intermediate beams that are to receive shear studs, run parallel to the deck span and the deck width either falls short or is positioned such that a trough is not located over the beam flange, galvanised mild steel flashings should be provided to form a closure to the profile (refer to Figs 4.9.1a to 4.9.1f). Flashings are available in 1.0mm, 1.2mm, 1.6mm and 2.0mm gauges; supplied to site in standard 3m lengths. The exact geometry and requirement for these flashings will be detailed on SMD decking layout drawings where provided. |
| − | [[File:4. | + | [[File:4.9.1a.png|500px|link=]] [[File:4.9.1b.png|500px|link=]] [[File:4.9.1c.png|400px|link=]] |
| − | + | [[File:4.9.1d.png|500px|link=]] [[File:4.9.1e.png|500px|link=]] [[File:4.9.1f.png|500px|link=]] | |
| − | + | ||
| − | + | ||
Revision as of 14:16, 12 September 2023
4.9.1 – Shallow floor deck flashing options.
Where perimeter beams, or intermediate beams that are to receive shear studs, run parallel to the deck span and the deck width either falls short or is positioned such that a trough is not located over the beam flange, galvanised mild steel flashings should be provided to form a closure to the profile (refer to Figs 4.9.1a to 4.9.1f). Flashings are available in 1.0mm, 1.2mm, 1.6mm and 2.0mm gauges; supplied to site in standard 3m lengths. The exact geometry and requirement for these flashings will be detailed on SMD decking layout drawings where provided.
Go to NEXT section
