7.2 - Fixing tool and stud welding gun restrictions
From TGN Online
Back to main Contents page
Where deck, edge trim or shear studs are to be installed to beams with obstructions within 570mm of the top of steel level, it may not be possible to achieve the required detail on site. Consideration must be given to sequence of works and possibly the design of non-composite beams in such locations.
Refer to SMD.DOD.164 - Fixing tool access restrictions and guidance
Other items within 7.0 - Design - Floor deck, Considerations:-
- 7.1 - Falls and ramps
- 7.2 - Fixing tool and stud welding gun restrictions
- 7.3 - Concrete encased beams
- 7.4 - Durability
- 7.5 - Aggressive environments
- 7.6 - Vibration
- 7.7 - Acoustics
- 7.8 - Thermal mass