Difference between revisions of "8.3 - Loads"
From TGN Online
(3 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | + | The maximum span values in [[:file:8.1a.jpg|Table 8.1a]] are based on the following design criteria: | |
+ | *Imposed Load of 1.5kN/m² | ||
+ | *Partial Load Factor of 1.5 (considering all loads as ‘Variable’) | ||
+ | *Imposed Load Deflection Limit of Span/200 | ||
+ | *Wind Uplift of 1.5kN/m², subject to appropriate fixings | ||
+ | *Wind Uplift Deflection Limit of Span/150 | ||
− | + | For more detailed designs, refer to '''[https://smdltd.co.uk/technical/elements-design-software/ SMD Elements® design software version 2.0]''' for more information | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | For more detailed designs, refer to '''[https://smdltd.co.uk/technical/elements-design-software/ SMD | + | |
'''[https://smdltd.co.uk/products-services/roof-deck/ More extensive load tables can be found on the SR product-specific data sheets]''' | '''[https://smdltd.co.uk/products-services/roof-deck/ More extensive load tables can be found on the SR product-specific data sheets]''' | ||
Line 19: | Line 15: | ||
− | + | Go to '''[[8.4 - Standard end laps|NEXT]]''' section | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + |
Latest revision as of 15:35, 14 August 2018
The maximum span values in Table 8.1a are based on the following design criteria:
- Imposed Load of 1.5kN/m²
- Partial Load Factor of 1.5 (considering all loads as ‘Variable’)
- Imposed Load Deflection Limit of Span/200
- Wind Uplift of 1.5kN/m², subject to appropriate fixings
- Wind Uplift Deflection Limit of Span/150
For more detailed designs, refer to SMD Elements® design software version 2.0 for more information
More extensive load tables can be found on the SR product-specific data sheets
Go to NEXT section