Difference between revisions of "8.8 - Sheet lengths"
From TGN Online
(Created page with "'''Back to main Contents page''' Body - First line Body - Last line ---- Other items within 8.0 - Design - Roof deck:- : 8.0 - Design - Roof deck : 8.1 -...") |
|||
| Line 3: | Line 3: | ||
| − | + | In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length varies depending on the deck profile and gauge (refer to Section 9.2). Where sheet lengths exceeding the recommended maximum length are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance. | |
| − | + | ||
| − | + | ||
Revision as of 12:52, 25 January 2017
Back to main Contents page
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length varies depending on the deck profile and gauge (refer to Section 9.2). Where sheet lengths exceeding the recommended maximum length are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance.
Other items within 8.0 - Design - Roof deck:-
- 8.0 - Design - Roof deck
- 8.1 - Quality
- 8.2 - Spans
- 8.3 - Loads
- 8.4 - Standard end laps
- 8.5 - Extended end laps
- 8.6 - Raking supports and cutting
- 8.7 - Cantilevers
- 8.8 - Sheet lengths
- 8.9 - Fire rating
- 8.10 - Durability
- 8.11 - Acoustics
- 8.12 - Airtightness
- 8.13 - Fixing specification
- 8.14 - Non-fragility
- 8.15 - Diaphragm design
- 8.16 - Protex® warranted insulated system
- 8.17 - Aesthetics
