8.8 - Sheet lengths
From TGN Online
Back to main Contents page
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length varies depending on the deck profile and gauge (refer to Section 9.2). Where sheet lengths exceeding the recommended maximum length are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance.
Other items within 8.0 - Design - Roof deck:-
- 8.0 - Design - Roof deck
- 8.1 - Quality
- 8.2 - Spans
- 8.3 - Loads
- 8.4 - Standard end laps
- 8.5 - Extended end laps
- 8.6 - Raking supports and cutting
- 8.7 - Cantilevers
- 8.8 - Sheet lengths
- 8.9 - Fire rating
- 8.10 - Durability
- 8.11 - Acoustics
- 8.12 - Airtightness
- 8.13 - Fixing specification
- 8.14 - Non-fragility
- 8.15 - Diaphragm design
- 8.16 - Protex® warranted insulated system
- 8.17 - Aesthetics
