|
|
| Line 12: |
Line 12: |
| | | | |
| | | | |
| − | '''Other items within 4.0 - Design - Floor deck:-'''
| + | Other items within 4.0 - Design - Floor deck:- |
| − | | + | : [[4.1 - Benefits of composite metal deck]] |
| − | '''[https://smdltd.co.uk/technical-info/4.1_-_Benefits_of_composite_metal_deck 4.1 - Benefits of composite metal deck]'''
| + | : [[4.2 - Sheet lengths]] |
| − | | + | : [[4.3 - Temporary propping]] |
| − | ''[https://smdltd.co.uk/technical-info/4.2_-_Sheet_lengths 4.2 - Sheet lengths]''
| + | : [[4.4 - Lateral restraint and diaphragm action]] |
| − | | + | : [[4.5 - Bearings / Support]] |
| − | '''[https://smdltd.co.uk/technical-info/4.3_-_Temporary_propping 4.3 - Temporary propping]'''
| + | : [[4.6 - Fixings]] |
| − | | + | : [[4.7 - Cantilevers]] |
| − | '''[https://smdltd.co.uk/technical-info/4.4_-_Lateral_restraint_and_diaphragm_action 4.4 - Lateral restraint and diaphragm action]'''
| + | : [[4.8 - Edge trim]] |
| − | | + | : [[4.9 - Flashings]] |
| − | '''[https://smdltd.co.uk/technical-info/4.5_-_Bearings_/_Support 4.5 - Bearings / Support]'''
| + | : [[4.10 - Steps in slab]] |
| − | | + | : [[4.11 - End caps]] |
| − | '''[https://smdltd.co.uk/technical-info/4.6_-_Fixings 4.6 - Fixings]'''
| + | |
| − | | + | |
| − | '''[https://smdltd.co.uk/technical-info/4.7_-_Cantilevers 4.7 - Cantilevers]'''
| + | |
| − | | + | |
| − | '''[https://smdltd.co.uk/technical-info/4.8_-_Edge_trim 4.8 - Edge trim]'''
| + | |
| − | | + | |
| − | '''[https://smdltd.co.uk/technical-info/4.9_-_Flashings 4.9 - Flashings]'''
| + | |
| − | | + | |
| − | '''[https://smdltd.co.uk/technical-info/4.10_-_Steps_in_slab 4.10 - Steps in slab]'''
| + | |
| − | | + | |
| − | '''[https://smdltd.co.uk/technical-info/4.11_-_End_caps 4.11 - End caps]'''
| + | |
Revision as of 09:31, 25 January 2017
Back to main Contents page
In accordance with Health and Safety (Manual Handling) guidance, the maximum recommended sheet length is 10 metres - Refer to Table 4.2a. Where longer sheets are required, an appropriate and safe means of installation must be considered, contact SMD Operations Team for further guidance.
Other items within 4.0 - Design - Floor deck:-
- 4.1 - Benefits of composite metal deck
- 4.2 - Sheet lengths
- 4.3 - Temporary propping
- 4.4 - Lateral restraint and diaphragm action
- 4.5 - Bearings / Support
- 4.6 - Fixings
- 4.7 - Cantilevers
- 4.8 - Edge trim
- 4.9 - Flashings
- 4.10 - Steps in slab
- 4.11 - End caps
